Shop

The Latest Technology from Leading Manufacturer

Our business is going to be about more than industrial services provider, but rather taking to be a material – equipment trader with an experienced, know-how technical team on hand, we hope to deliver an improved and simplified business to business with a deep understanding of customers’ needs across the various industries. We provide a wide range of products for diverse applications.

Renolit CP Advanced

  • Minimum downtime

Once the RENOLIT CP Advanced corrosion protection film has been applied, your wind turbines can be back in operation much more quickly because it does not require primer or drying time.

  • Fewer application steps

RENOLIT CP Advanced is applied in just a few steps and the corrosion protection is immediately effective – even on rough or uneven substrates. Clean the surface, apply the film, done.

  • Environmentally friendly

In contrast to paint, you can be sure that the application of RENOLIT CP Advanced does not produce any environmentally harmful VOC emissions or release any hazardous substances into the environment.

  • Tested and certified

Sit back and relax, because RENOLIT CP Advanced offers corrosion protection of 10 years and more – extensively tested and certified in accordance with the BAW standard (DIN EN ISO 12944-9 CX).

  • Robust and resistant

With RENOLIT CP Advanced, your onshore and offshore wind turbines benefit from effective protection against extreme weather conditions, sea air and UV radiation – because the corrosion protection film can withstand all of this effortlessly.

  • Cost-efficient

Minimize maintenance costs, material usage and downtimes with the corrosion protection film from RENOLIT CP Advanced and improve the profitability of your wind turbines.

Renolit CP

The New RENOLIT Coating Method is Certified according to ISO 12944-9 CX

CX corresponds to the highest corrosion category and thus also applies to structures of steel and metal coatings in industrial applications which are in high-humidity locations, and thus exposed to particularly aggressive ambient conditions.

The new RENOLIT CP corrosion protection film represents a new and improved concept which: reduces service and maintenance costs, increases the efficiency of wind turbines and avoids down-time.

FibaShield

FibaShield is FTI’s innovative, proprietary pre-insulated pipe system designed to protect pipelines from corrosion under insulation (CUI). Unlike traditional on-site insulation methods, FibaShield allows off-site pre-insulation in a controlled workshop environment, significantly improving efficiency, safety, and long-term performance. This system is widely used in oil & gas, LNG, and industrial applications to extend pipeline lifespan, reduce maintenance costs, and enhance operational safety.

Triflex Special Fleece

Triflex Special Fleece is used for reinforcement and layer thickness control with
Triflex PMMA and PUR systems.

FibaRoll

FibaRoll is a glass-reinforced plastic (GRP) cladding system that cures under UV light (natural or artificial). It is designed to protect insulation and substrates from environmental damage, corrosion, and mechanical stress. FibaRoll is easy to install, lightweight, and highly durable, making it ideal for oil & gas, marine, and industrial applications.

FibaClad

FibaClad is a glass-reinforced plastic (GRP) cladding system delivered as pipe sections or flat sheets for protecting insulated pipes, vessels, and tanks. It is designed to prevent corrosion under insulation (CUI) while providing mechanical protection and weather resistance. FibaClad is widely used in oil & gas, petrochemical, and industrial sectors for its durability and ease of installation.

FibaBond

FibaBond is a high-performance adhesive system designed for bonding GRP cladding (FibaClad, FibaRoll) to insulation and substrates. It ensures strong, durable, and waterproof adhesion, critical for long-term protection against CUI and environmental damage. FibaBond is engineered to withstand extreme temperatures, chemicals, and mechanical stress, making it ideal for oil & gas, marine, and industrial applications.

ProtectGuard® Color AntiGraffiti

ProtectGuard® Color AntiGraffiti, one product, two functions:

  1. Water/oil repellent and permanent protection against graffiti
    ProtectGuard® Color AntiGraffiti provides long-lasting protection against soiling, stains of all types, atmospheric pollution, grease marks, ingress, etc.
    ProtectGuard® Color AntiGraffiti provides permanent protection against graffiti. It can resist several dozen cleans (using Guard Remover Graffiti® 2010 cleaner) and does not need to be reapplied after graffiti is removed.
  2. Pigmented stain
    ProtectGuard® Color AntiGraffiti is a semi-transparent product which respects the mineral properties of materials. ProtectGuard® Color AntiGraffiti is available in 42 standard shades or 32 High Jewellery shades, with many original effects. We are able to create any opacity and custom-made colour.

ImperGuard® CE

  • ImperGuard® CE provides long-lasting protection for all concretes against water, chlorides, corrosion and carbonation. It also prevents the main causes of deterioration like atmospheric pollution, grease stains, ingress, graffiti, etc. It slows down the ageing of the material and makes it easier to maintain.
  • ImperGuard® CE is a non-film forming impregnation product, the material is still permeable to air and water vapour. Completely colourless after application, it does not change the appearance or the nature of the treated material. It is also fully resistant to UV rays and does not yellow over time.
  • ImperGuard® CE is a concrete protection product with CE marking, compliant with Standard NF EN 1504-2, enabling all concrete structure protection requirements to be be met

ProtectGuard® CE

  • ProtectGuard® CE provides long-lasting protection for all concretes against water, chlorides, corrosion and carbonation. It also prevents the main causes of deterioration like atmospheric pollution, grease stains, ingress, graffiti, etc. It slows down the ageing of the material and makes it easier to maintain.
  • ProtectGuard® CE is a non-film forming impregnation product, the material is still permeable to air and water vapour. Completely colourless after application, it does not change the appearance or the nature of the treated material. It is also fully resistant to UV rays and does not yellow over time.
  • ProtectGuard® CE is a concrete protection product with CE marking, compliant with Standard NF EN 1504-2, enabling all concrete structure protection requirements to be be met.

ImperGuard® RF

  • ImperGuard® RF is a colourless, solvent-free impregnation product designed to protect concretes and all new mineral-based materials at depth against water, damp, chlorides, carbonation and corrosion. Its penetrating power enables it protect the material up to 5 cm deep.
  • ImperGuard® RF is a non-film forming impregnation product, the material remains permeable to air and water vapour.
  • ImperGuard® RF also protects against micro-cracks of a maximum size of 0.3 mm and stops alkali-silica or alkali-aggregate reactions of concretes and construction materials.

ImperGuard® SV

  • ImperGuard® SV is a highly efficient solvent-based product designed to protect concretes against water penetration.
  • ImperGuard® SV significantly reduces capillary absorption of water. This outstanding performance deeply protects porous and low porous concretes against penetration by precipitation.
  • ImperGuard® SV thus eliminates negative effects caused by humidity : erosion, degradation due to continuous ‘freezethaw’ cycles, efflorescence, saltpeter, development of micro-organisms, etc.
  • ImperGuard® SV is a non-film forming impregnation product, the material is still permeable to air and water vapour. Completely colourless after application, it does not change the appearance or the nature of the treated material. It is also fully resistant to UV rays and does not yellow over time.

Guard Cleaner® Maintenance

  • Guard Cleaner® Maintenance is a higly concentrated product designed for the cleaning and daily maintenance of concretes protected with a product from the ProtectGuard® or ProtectGuard® Color ranges.
  • Guard Cleaner® Maintenance eliminates stains, grease, pollution marks without altering the protection product. Guard Cleaner® Maintenance helps keeping the brand new appearance of the concrete and makes it easier to maintain.
  • Guard Cleaner® Maintenance can also be used to eliminate grease and form oils. It can be used with Guard Cleaner® Surface Preparation to achieve a perfect concrete preparation before application of a protection product.
  • In contrast to commonly-used corrosive or irritant products, Guard Cleaner® Maintenance consists of easily biodegradable and effective molecules.

Guard Cleaner® Surface Preparation

  • Guard Cleaner® Surface Preparation is a cleaner which rapidly removes mortar or concrete laitance, limescale deposits and traces of efflorescence.
  • Guard Cleaner® Surface Preparation increases the concrete’s porosity and helps finishing products to penetrate.
  • Guard Cleaner® Surface Preparation is a new generation product, it is much less aggressive than other products on the market (it is not classified and labelled corrosive or irritant, which means that the risk of accidents during its use is greatly reduced).
  • Guard Cleaner® Surface Preparation requires no neutralisation after rinsing with water.
  • Do not use on UHPC with metallic fibers.

ProtectGuard® Color

ProtectGuard® Color: one product, two functions:

  1. Water and oil repellent
    ProtectGuard® Color provides long-lasting protection against the main causes of deterioration like soiling, stains of all types, atmospheric pollution, grease marks, ingress, etc. Treated materials, resistant to water/oil ingress and marks. The cleanliness of the treated surfaces is therefore ensured.
  2. Pigmented stain
    ProtectGuard® Color is a stain tailored for concretes. In contrast to a paint, it is a semi-transparent product which respects the mineral nature of materials. The final colour depends on the colour of the stain and the colour of the material. ProtectGuard® Color is available in 42 standard shades or 32 High Jewellery shades,
    ProtectGuard® Color is a non-film forming impregnation product, the material remains permeable to air and water vapour. ProtectGuard® Color is a single-component product not requiring the application of a homogenising primer.

Primer Guard®

  • Primer Guard® is a product designed to be used as a primer before application of any two-component products from the Guard Industry range: ProtectGuard Color® AntiGraffiti or AntiGraffiti Guard®.
  • Primer Guard® facilitates adherence due to its capacity to adhere strongly to the material. It therefore guarantees perfect adherence of two-component products. Primer Guard® is a non-film forming impregnation product, the material remains permeable to air and water vapour.

Super AntiGraffitiGuard®

ProtectGuard® Color AntiGraffiti, one product, two functions:

  1. Water/oil repellent and permanent protection against graffiti
    ProtectGuard® Color AntiGraffiti provides long-lasting protection against soiling, stains of all types, atmospheric pollution, grease marks, ingress, etc.
    ProtectGuard® Color AntiGraffiti provides permanent protection against graffiti. It can resist several dozen cleans (using Guard Remover Graffiti® 2010 cleaner) and does not need to be reapplied after graffiti is removed.
  2. Pigmented stain
    ProtectGuard® Color AntiGraffiti is a semi-transparent product which respects the mineral properties of materials. ProtectGuard® Color AntiGraffiti is available in 42 standard shades or 32 High Jewellery shades, with many original effects. We are able to create any opacity and custom-made colour.

RAM Underwater Primer

RAM Underwater Primer consists of a unique blend of marine grade petrolatum hydrocarbon primer containing water displacing corrosion inhibiters, flow control additives and broad-spectrum biocides.The primer is the key component of the RAM Marine System for the preparation of metal surfaces prior to wrapping. The RAM Marine System adheres to the substrate whilst displacing water, passivating steel, filling voids, and ensures intimate contact between the RAM Marine Tapes and the substrate. The RAM Underwater Primer compound will not dry out or harden and is unyielding to moisture, acids, alkalis, and salt solutions.

RAM Marine Tape

The RAM Marine Tape consists of synthetic cloth being saturated with petrolatum, inherit fillers passivating inhibitors and water displacing agents that can be applied to metal above and below water.The RAM Marine Tape is a permanently flexible membrane for corrosion prevention/waterproofing of metal structures below water and the tidal / splash zone by acting as a lock out the coating and is also suitable for waterproofing/ exclude of oxygen for timber structures underwater that is unyielding to moisture, acids, alkalis, and salt solutions.

Series 200 Jacket

A 2 mm thick Ultra Violet Resistant High Density Polyethylene sheet which has impact, abrasion, and chemical resistance sufient for a wide range of environmental conditions.The RAM Series 200 Jacket is fastened with 316 stainless steel marine grade bolts and nuts.

FlexiSeal 1000

FlexiSeal 1000 is ideal for corrosion prevention and dielectric protection and is typically used for underground pipe work and metal structures, particularly for the coating of welded joints of pipelines for gas, liquid and water transport.Flexi Seal 1000 is consists of a self adhesive bituminous rubber compound protected by a medium thickness PE film. The tape has an integral hi-tensile, flexible PE backing which provides high mechanical strength, impact resistance and controlled elasticity/ hoop tension.

Flexiseal 70

FlexiSeal 70 is ideal for corrosion prevention and dielectric protection and is typically used for underground pipework and metal structures, particularly for the coating of welded joints of pipelines for gas, liquid, and water transport.FlexiSeal 70 is made up of a self-adhesive SBS compound protected by a medium thickness HDPE film. The tape has an integral hi-tensile, cross-laminated HDPE backing which imparts high mechanical strength, impact resistance, and controlled elasticity/ hoop tension.

Flexiseal 40

Flexi Seal 40 is ideal for corrosion prevention and dielectric protection and is typically used for underground pipe work and metal structures, particularly for the coating of welded joints of pipelines for gas, liquid and water transport.Flexi Seal 40 is made up of a self-adhesive SBS compound protected by a medium thickness HDPE film. The tape has an integral hi-tensile, cross-laminated HDPE backing which imparts high mechanical strength, impact resistance, and controlled elasticity/ hoop tension.

Flexiseal Primer

FlexiSeal Primer is ideal for corrosion prevention and dielectric protection and is typically used for underground pipework and metal structures, particularly for the coating of welded joints of pipelines for gas, liquid, and water transport.FlexiSeal Primer is based on bitumen modified with rubber and resins to produce a specifically formulated primer for the Flexi Seal range of tapes.

FlexiClad 70

FlexiClad 70 is designed for protection pipes, welded joints, bends and fittings. The combination of PVC backing and polymer bitumen adhesive ensures vigorous contact with the metal substrate and excellent adhesion. Suitable for machine or hand application.The tape has an integral hi-tensile, cross laminated PVC backing which imparts high mechanical strength, impact resistance and controlled elasticity/ hoop tension.

FlexiClad 40

FlexiClad 40 is designed for protection of pipes, welded joints, bends and fittings. The combination of polymer bitumen adhesive and PVC backing ensures vigorous contact with the metal substrate and excellent adhesion. Suitable for machine or hand application.The tape has an integral hi-tensile, cross laminated PVC backing which imparts high mechanical strength, impact resistance and controlled elasticity/ hoop tension.

Triflex ProDeck

Triflex ProDeck is designed for surfaces subject to high mechanical loads. As a result of the innovative, special reinforcement, shearing forces, which arise in particular at tight curves and ramp approaches, are distributed across the surface. As a result of using only high-quality PMMA resins throughout the whole of the system structure, a consistent chemical bond is achieved which, moreover, keys into the full surface of the substrate. This effectively prevents cracks and wide-area detachment from the substrate. The system scarcely wears at all, even under continuous vehicle traffic, and can accept high mechanical loads. This is ensured by a particularly wear-resistant dressing. In spite of its high grip and highly non-slip finish, Triflex ProDeck is easy to look after.

Triflex ProPark

Waterproofing for top decks and parking decks over occupied premises must meet high quality standards if they are to be functional in the long term. In exposed areas in particular, thermal loads and the resulting structural movements must be reliably absorbed. Entrances and exits as well as straight and spiral ramps are also subject to high shear forces due to the high volume of traffic. The use of PMMA throughout ensures that the chemical bond between the layers holds across the entire surface without water infiltration. The system-integrated detail solutions, e.g. for junctions and joints, round off the refurbishment concept to give your structure long-lasting protection against chemical and mechanical loads.

Triflex ProFloor

Triflex DeckFloor is a watertight thick-layer system with static crack-bridging. The system is able to withstand high mechanical loads and has been specially designed for heavily used, naturally ventilated intermediate decks. Top decks can also be fitted with a surfacing system made of polymethyl methacrylate resin (PMMA). Triflex DeckFloor is approved in compliance with OS 13 as well as OS 8.

Triflex Metal Coat

The metal roof has stood the test of time in the field of industry. Not only does it provide cost-effective protection against the effects of weather, but an insulated metal roof is also the preferred solution for complying with the new German energy saving regulations. Metals are also used for façade cladding, containers and tanks, pipework and process apparatus as well as many other constructions. Metals that are exposed to the effects of weather as well as mechanical loads corrode at a faster rate, leading to surface rust, blistering rust and eventually scaling. This compromises the functionality of the metal roof.

Triflex Metal Coat is a functional coating that was specially developed for metal roofs. It protects against corrosion and prolongs the life of metal roofs and constructions.

Triflex Prosolar

Aware of current ecological issues, Triflex has developed a reflective, high-performance and durable roof waterproofing system: Triflex ProSolar.

Installation is possible both in new construction and in renovation, on concrete or on old existing waterproofing, while retaining the same benefits in terms of thermal comfort.

Triflex ProTect

Architects and contractors alike are only too familiar with the challenge: surfacing rooftops with gravel, paving or greenery is in vogue. Whatever the covering, it is paramount that they are absolutely leak-proof. Triflex ProTect shines in situations where traditional materials in combination fail. Whether on top of or underneath other coverings: the roof waterproofing system provides reliable, lasting protection for roofs. The full-surface-reinforced waterproofing system with a polymethyl methacrylate (PMMA) base is highly weather-resistant and also resistant to UV and IR radiation. With its high resistance to hydrolysis, Triflex ProTect is also suitable for standing water applications, e.g. fountains and water tanks.

Triflex ProFibre

Detail waterproofing of intricate roof structures.

According to the Flat Roof Guidelines of the German Roofing Trade Association and to DIN 18531, roof waterproofing must be carried out with fleece reinforcement. Triflex ProFibre is a special solution that reliably waterproofs complicated roof structures outside the Code of Practice. The roof waterproofing system can be applied at low temperatures and adheres to almost all substrates in common use. Tested for its fire-resistant properties, it has fire classification as per DIN EN 13501-5: BRoof (t1) and DIN EN 13501-1: Class E (approx. B2).Triflex ProFibre is used for structurally hard-to-reach details, where it is impossible to use a fleece-reinforced waterproofing system.

Triflex Towersafe

Triflex Towersafe is a specially developed solution designed to waterproof the tower, foundation, joints, flanges, nacelles and for specific details including blade root. Other solutions include coatings and filling compounds for both new and for refurbishment. The fully reinforced system can be installed quickly to minimise downtime, and can easily withstand the unique demands of this tough environment.

Triflex ProDrain

Triflex ProDrain is a special solution which is ideal for refurbishing saturated substrates on balconies and terraces.

Balcony coating and waterproofing solutions extend the life of balconies and roof terraces. In many cases, however, as the substrate ages it requires increasing amounts of refurbishment, for which the only solution is a tried-and-tested, reliable system.

Refurbishment is often put off until the substrate is saturated or heavily soiled. At worst, the existing coverings are damaged or the substrate cracked. Substrates prone to slight movement can be just as problematic.

Triflex SmartTec

Triflex SmartTec is the universally applicable roof and building structure waterproofing solution. The innovative, liquid applied waterproofing technology is particularly suitable for application on damp, mineral substrates. Ideal for the treatment of both complex details and full surface applications, this material moulds itself seamlessly to the substrate of the structure, thus ensuring a long-lasting and reliable solution.

Triflex ProDetail

Triflex ProDetail is a waterproofing system developed specially for joints that ensures the lasting reliable protection of details. Generally speaking, leaks in a flat roof are only noticed when the premises underneath show signs of dampness. For this reason, damage tends to occur in the cold seasons. Triflex ProDetail is factory-set so that it can be used at substrate temperatures of -5°C. The liquid Triflex ProDetail is rainproof after approx. 30 minutes and completely cured in approx. 45 minutes. Repairs can therefore be reliably carried out in all weathers.

Socoblade Lep 220H

A 2 components liquid coating to protect leading edges from erosion

SOCOMORE, your partner in long lasting protection for your blades
SOCOBLADE LEP 220 & 220H provide a strong and durable protection against rain, sand, hail, sea salt and other particle erosion with its special chemical design. They have been designed considering on-site application constraints, to offer ease of application and high quality result.

  • PROTECTION: 3 layer system provides extra performance protection (3 layers = 250 μm)
  • ADAPTABILITY: Suitable for use on all substrates and models of blades
  • EASY APPLICATION: Optimized for wind turbine ­eld repair application
    • Brushable / rollable polyurethane coating
    • Very good self-leveling quick application with excellent finish
    • Can be recoated after 20-40 minutes (depending on weather conditions)
    • No sanding needed between coats* (if the coating is applied within 24 hours)
    • Basecoat and topcoat differently tinted to ease visual application
    • (Topcoat color match light grey RAL 7035)

Socoblade Lep 220

A 2 components liquid coating to protect leading edges from erosion

SOCOMORE, your partner in long lasting protection for your blades
SOCOBLADE LEP 220 & 220H provide a strong and durable protection against rain, sand, hail, sea salt and other particle erosion with its special chemical design. They have been designed considering on-site application constraints, to offer ease of application and high quality result.

  • PROTECTION: 3 layer system provides extra performance protection (3 layers = 250 μm)
  • ADAPTABILITY: Suitable for use on all substrates and models of blades
  • EASY APPLICATION: Optimized for wind turbine ­eld repair application
    • Brushable / rollable polyurethane coating
    • Very good self-leveling quick application with excellent finish
    • Can be recoated after 20-40 minutes (depending on weather conditions)
    • No sanding needed between coats* (if the coating is applied within 24 hours)
    • Basecoat and topcoat differently tinted to ease visual application
    • (Topcoat color match light grey RAL 7035)

Belzona 1131

A 2-part epoxy metal repair composite with self-lubricating properties for creation of low friction surfaces and protection of lubrication systems from wear and seizure in the event of lubrication loss.

This solvent-free repair composite has a unique microporous structure which allows it to trap and hold lubricating oil, minimising friction at start-up and improving the efficiency of mechanical equipment such as pumps. It has outstanding chemical resistance and will bond to almost any rigid surface without the need for hot work.

Alexit Bladerep Topcoat 12

Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides applicators with the ideal product for blade repairs.

900G +/-45 Biax Glass Per LM

900g Biax Stitched Glass 1.27m wide

XE1010/1270 Biax 45 EGL Stitched Glass

Biaxial glass fabric built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy. Widely used for processes where a very good mechanical strength combined with aesthetic quality finishes are required. “Print through” effect is avoided when placing these fabrics not too close on the gel coat.

300G+/-45 Biax Glass Per LM

300g Biax Stitched Glass 1.27m wide

QE1200/1270 Quad Stitched Glass

  • Size: 1 Metre x 1.27 Metre
  • DNV & GL Registered
  • Heavy weight quadaxial glass

YE900/1270 Triaxial Stitched Glass

Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy

UT-E6001270 UD Glass Tape

  • DNV & GL Registered
  • Suitable for adding structure where required

Sikapower 1200

SikaPower®-1200 is a tough, high strength, solvent free, thixotropic, fast curing epoxy adhesive. It is designed for fast assembly bonding of structural composite substrates, like GFRP and CFRP laminates, as well as metallic substrates. The adhesive cures by polyaddition of the two components.

Gurit Ampreg 30 Resin

Gurit has a wide range of ambient curing* products that are OEM qualified and available globally through our distribution network. To find your nearest stockist, please visit our Contact Gurit page.

SikaForce 800

SikaForce®-800 is a two component polyurethane based profile and surface filler that works best at temperature above 15 °C. If ambient temperatures are lower than 15 °C it is advisable to use

No more product to show