Belzona 1391T

Belzona 1391T is a 2-part ceramic-filled epoxy coating that provides erosion and corrosion resistance to high-temperature equipment operating under immersion up to 120°C (248°F). It offers excellent resistance to a wide range of aqueous solutions, hydrocarbons, and process chemicals.This 2-coat, solvent-free system is applied using simple hand tools to areas requiring maximum erosion resistance. It has a long overcoat window and can be rapidly force cured allowing applications to be effectively completed with minimal downtime, shortening application time and simplifying maintenance procedures.

For situations where a sprayable coating is required, Belzona 1391S is ideal.

Belzona 5871

Belzona 5871 is a two-component, polymeric, solvent free system providing a thermal insulation barrier with corrosion protection and thermal and sub- zero “cool-to-touch” properties.This material is designed to be applied to metal pipework, ducting and other industrial equipment. Belzona 5871 is thermally insulating, providing protection against contact-burn injuries, eliminates corrosion/CUI, condensation and anti-icing, improving safety and durability.

Belzona 5871 can be applied by brush, cartridge or plural spray, expanding upon application to produce a lightweight, closed-cell foam. This reduces the surface temperature of metallic substrates to below 60°C (140°F) whilst providing corrosion protection.

Belzona 5841

A solvent-free, 2-part epoxy coating designed to provide outstanding protection to hot metal surfaces against corrosion under insulation (CUI). This surface-tolerant coating can be applied by brush directly onto hot metal surfaces from 30°C to 80°C (86°F – 176°F) with minimal preparation required.

Belzona 1341

A 2-part epoxy coating designed to improve efficiency of pumps, pipes, valves and other fluid handling equipment while protecting them from the effects of erosion and corrosion. This high performance product is proven to reduce energy consumption, provide excellent chemical resistance and lower maintenance costs. Belzona 1341 (Supermetalglide) improves pump efficiency by using hydrophobic technology to repel process fluids and reduce turbulent flow. Efficiency increases of up to 7% have been recorded on new equipment and up to 20% on refurbished equipment.

Belzona 1321

A 2-part ceramic filled epoxy coating designed to provide erosion and corrosion resistance of metal surfaces. This solvent-free epoxy coating has outstanding chemical resistance and will bond to almost any rigid surface.Due to its high compressive strength it can be also used to create a perfect shim. This material is easy to mix and apply without the need for specialist tools and it cures at room temperature eliminating the need for hot work.

Belzona 7311

Belzona 7311 is a fatigue resistant adhesive, optimised for structural bonding applications requiring high mechanical strength, cleavage and shear resistance. Belzona 7311 is ideally suited for bonding applications subjected to cyclic and repeated load.

As a specially designed adhesive, it offers the perfect alternative to mechanical fastenings/fixings and can be a viable alternative to welding, eliminating any need for hot work, making it a safe yet high-performance solution. This easy to mix product requires no specialist tools or equipment for application and cure and is suitable for both dry and wet service up to 60 °C (140 °F).

With a high amount of performance data available from the development and testing of Belzona 7311, customers have the ability to perform finite element analysis (FEA) and model bonded assemblies. This allows a client to simulate the stresses the adhesive will experience in service to satisfy themselves that the Belzona 7311 solution is capable of performing against real-world forces it will be subjected to in use.

Belzona 1161

A 2-part composite material for metal repair and resurfacing based on a solvent-free, surface-tolerant epoxy resin reinforced with silicon steel alloy. This composite material is specifically designed for application to wet and oil contaminated surfaces, as well as for underwater applications. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.

Belzona 1511

A two-part repair composite based on a solvent-free epoxy resin reinforced silicon with steel alloy. This high temperature repair system is designed for metal repair and rebuilding equipment and provides excellent corrosion protection.Under immersion, Belzona 1511 (Super HT-Metal) is suitable for applications up to 150 °C (302 °F). This product can be overcoated with Belzona high temperature coatings without the need for frost blasting, significantly reducing application costs and downtime.

Belzona 1511 (Super HT-Metal) will not corrode and resists a wide range of chemicals. This repair material can be easily mixed and applied without the need for specialist tools, and when cured is durable yet fully machinable.

Belzona 1131

A 2-part epoxy metal repair composite with self-lubricating properties for creation of low friction surfaces and protection of lubrication systems from wear and seizure in the event of lubrication loss.

This solvent-free repair composite has a unique microporous structure which allows it to trap and hold lubricating oil, minimising friction at start-up and improving the efficiency of mechanical equipment such as pumps. It has outstanding chemical resistance and will bond to almost any rigid surface without the need for hot work.

Belzona 1311

A 2-part epoxy-based repair composite designed for metal repair and protection against the effects of erosion and corrosion. This solvent-free repair composite has excellent chemical resistance and will bond to all metals and most other rigid surfaces. It is easy to mix and apply without the need for specialist tools and it cures at room temperature eliminating the need for hot work. It is ideally suited to be overcoated with Belzona 1321 (Ceramic S-Metal) to ensure long-lasting performance. Belzona 1311 (Ceramic R-Metal) can also be used as a high strength structural adhesive for metal bonding and to create irregular load bearing shims.

Color Spray by Zinga

The high qualitative ACRYL paint developed for simple applications on all surfacesColor Spray by ZINGA® is a high qualitative ACRYL paint developed for simple applications on all surfaces such as metal, wood, paper, glass, cardboard, concrete, ceramics, …
Color Spray by ZINGA® is specially developed for a good compatibility on our film galvanizing system ZINGA®.

Aluspray

The coating based on aluminium flakes in aerosol sprayAluspray offers a coating based on aluminium flakes in aerosol spray. It can be applied either without primer on an old, non-corroded hot-dip galvanisation or metallisation layer or as topcoat on top of ZINGA.

Aluspray is mainly applied for esthetical reasons as it gives a nice aluminium aspect.

Zingaluspray

The film galvanising system ZINGA in an aerosol spray for easy small applicationsZINGALUSPRAY offers the film galvanising system ZINGALU in an aerosol spray for easy small applications.

ZINGALUSPRAY has 90% of ultra pure zinc (ASTM D520 type III) and 4% aluminium flakes in the dry film which provide long lasting cathodic protection to ferrous metals.

The aluminium flakes offer barrier protection and a bright finishing color, matching the color of galvanised surfaces. Therefore ZINGALUSPRAY is ideal for repairing and touching-up of damaged or old hot-dipped, Zinganised or other zinc coated structures.

Zingaspray

The film galvanising system ZINGA in an aerosol spray for easy small applicationsZingaspray offers the film galvanising system ZINGA in an aerosol spray for easy small applications. To match a Hot Dip Galvanised surface; Aluminium flakes have been added.

Zingaspray still contains 96% Zinc in the dry film and provides cathodic protection to ferrous metals.

Zingaspray is ideal for the repairing and touching-up of small areas and welds on galvanized steel structures or structures coated with ZINGA.

Zingasolv

The C9-C10 aromatic hydrocarbon solvent for ZINGA, Zingalufer, Zingatarfree, Alu ZM and topcoats.Zingasolv is a C9-C10 aromatic hydrocarbon solvent.

Zingasolv is manufactured to the highest standards. It does not contain detectable quantities of polycyclic aromatics, heavy metals or chlorinated compounds.

Used as solvent for ZINGA, Zingalufer, Zingatarfree, Alu ZM and topcoats.

Zingalu

ZINGALU is a one component high performance stand-alone organic zinc-rich coating. ZINGALU has 90% of ultrapure zinc (ASTM D520 type III) and 4% aluminum flakes in the dry film which provide long-lasting cathodic protection to ferrous metals.

The aluminum flakes offer barrier protection and a bright finishing color, matching the color of galvanized surfaces. Therefore ZINGALU is ideal for repairing and touching-up of damaged or old hot-dipped, Zinganised or other zinc coated structures. It can be applied by brush, roller or spray equipment on a clean and rough substrate in a wide range of atmospheric circumstances.

ZINGALU is also available as an aerosol and is sold as Zingaluspray.

Aquazinga

The two pack 100% water-based anti-corrosion system based on inorganic zinc silicatesAquazinga is a two pack 100% water-based anti-corrosion system based on inorganic zinc silicates. Due to its high zinc content in the dry film (94%) it provides cathodic protection to ferrous metals.

It can be used as a stand alone system as an alternative to hot-dip galvanisation or metallisation. Aquazinga has an excellent resistance to abrasion and is designed to withstand corrosive environments and severe conditions, including high temperatures (up to 600°C)