Sikapower 1200

SikaPower®-1200 is a tough, high strength, solvent free, thixotropic, fast curing epoxy adhesive. It is designed for fast assembly bonding of structural composite substrates, like GFRP and CFRP laminates, as well as metallic substrates. The adhesive cures by polyaddition of the two components.

Alexit Bladerep Topcoat 12

Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides applicators with the ideal product for blade repairs.

300G+/-45 Biax Glass Per LM

300g Biax Stitched Glass 1.27m wide

UT-E6001270 UD Glass Tape

  • DNV & GL Registered
  • Suitable for adding structure where required

YE900/1270 Triaxial Stitched Glass

Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy

900G +/-45 Biax Glass Per LM

900g Biax Stitched Glass 1.27m wide

QE1200/1270 Quad Stitched Glass

  • Size: 1 Metre x 1.27 Metre
  • DNV & GL Registered
  • Heavy weight quadaxial glass

Gurit Ampreg 30 Resin

Gurit has a wide range of ambient curing* products that are OEM qualified and available globally through our distribution network. To find your nearest stockist, please visit our Contact Gurit page.

XE1010/1270 Biax 45 EGL Stitched Glass

Biaxial glass fabric built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy. Widely used for processes where a very good mechanical strength combined with aesthetic quality finishes are required. “Print through” effect is avoided when placing these fabrics not too close on the gel coat.

Triflex Towersafe

Triflex Towersafe is a specially developed solution designed to waterproof the tower, foundation, joints, flanges, nacelles and for specific details including blade root. Other solutions include coatings and filling compounds for both new and for refurbishment. The fully reinforced system can be installed quickly to minimise downtime, and can easily withstand the unique demands of this tough environment.

Zinga

ZINGA is a one-component coating that provides cathodic protection for ferrous metals and contains 96% pure zinc in the dry film.The ZINGA Galvanizing System is a coating comprising up to 96% zinc in the dry film that offers cathodic protection for ferrous metals… As a single system replacement for hot-dip galvanizing or metallurgy, as a primer in duplex protection systems (active and passive), or as systems Repair for hot-dip galvanized and galvanized surfaces.

Zinga may be swept, rolled, or sprayed over clean and uneven surfaces under a range of environmental circumstances.

FlexiClad 40

FlexiClad 40 is designed for protection of pipes, welded joints, bends and fittings. The combination of polymer bitumen adhesive and PVC backing ensures vigorous contact with the metal substrate and excellent adhesion. Suitable for machine or hand application.The tape has an integral hi-tensile, cross laminated PVC backing which imparts high mechanical strength, impact resistance and controlled elasticity/ hoop tension.

FlexiClad 70

FlexiClad 70 is designed for protection pipes, welded joints, bends and fittings. The combination of PVC backing and polymer bitumen adhesive ensures vigorous contact with the metal substrate and excellent adhesion. Suitable for machine or hand application.The tape has an integral hi-tensile, cross laminated PVC backing which imparts high mechanical strength, impact resistance and controlled elasticity/ hoop tension.

Starball

This product is a hard and unyielding abrasive in spherical shapes. Starball is made by sintering fine Bauxite ore. Bauxite is the main ore used to produce Aluminium and consists 75% of Aluminium Oxide.Often used to replace brown fused aluminium oxide, Starball can be used with conventional abrasive blasting equipment, air-compressed pressure and suction jet blasting equipment. Sintered bauxite is also used for the followag applications: antiskid flooring, carving etching, finishing. grinding. lapping. polishing, rock tumbling, lapidary, sandblasting, slurry mixes, surface preparation and tumbling. It is exceptionally well suited for use with air compressed jet blasting equipment, both pressure and suction.

Steel Shot

Steel Shot is a fully heat-treated spherical product of hyper-eutectoid steel. It has a uniform structure of finely tempered martensite to provide optimum resilience and resistance to fatigue.The microstructure of steel shot is uniform martensite, tempered to a degree consistent with the hardness range, with fine, well distributed carbides, if any.
FUNCTION : Typical applications include: preparation of metal surfaces prior to subsequent coating, removal of sand from castings, descaling of steel strips, bars, pipes, shot peening, etc. Industry users include: foundries, automotive, aviation, blast/paint contractors, pipeline manufacturers, steel fabricators.

Steel Grit

Steel Angular Grit is produced by crushing specifically heat-treated shot pellets. Service characteristics depend upon hardness seletion.GH Steel Grit: With maximum hardness, stays angular in the mix, does not shatter readily and has a fast, effective, etching action. ldeal for deep descaling and etched surface requirements. For use mainly with compressed air equipment.

Brown Aluminium Oxide

ALCAB is an extremely hard brown fused alumina which is very resistant agains fracturing on impact It is the second hardest mineral after a diamond.

Triflex SmartTec

Triflex SmartTec is the universally applicable roof and building structure waterproofing solution. The innovative, liquid applied waterproofing technology is particularly suitable for application on damp, mineral substrates. Ideal for the treatment of both complex details and full surface applications, this material moulds itself seamlessly to the substrate of the structure, thus ensuring a long-lasting and reliable solution.

Triflex ProDrain

Triflex ProDrain is a special solution which is ideal for refurbishing saturated substrates on balconies and terraces.

Balcony coating and waterproofing solutions extend the life of balconies and roof terraces. In many cases, however, as the substrate ages it requires increasing amounts of refurbishment, for which the only solution is a tried-and-tested, reliable system.

Refurbishment is often put off until the substrate is saturated or heavily soiled. At worst, the existing coverings are damaged or the substrate cracked. Substrates prone to slight movement can be just as problematic.

Triflex ProFibre

Detail waterproofing of intricate roof structures.

According to the Flat Roof Guidelines of the German Roofing Trade Association and to DIN 18531, roof waterproofing must be carried out with fleece reinforcement. Triflex ProFibre is a special solution that reliably waterproofs complicated roof structures outside the Code of Practice. The roof waterproofing system can be applied at low temperatures and adheres to almost all substrates in common use. Tested for its fire-resistant properties, it has fire classification as per DIN EN 13501-5: BRoof (t1) and DIN EN 13501-1: Class E (approx. B2).Triflex ProFibre is used for structurally hard-to-reach details, where it is impossible to use a fleece-reinforced waterproofing system.

Triflex ProTect

Architects and contractors alike are only too familiar with the challenge: surfacing rooftops with gravel, paving or greenery is in vogue. Whatever the covering, it is paramount that they are absolutely leak-proof. Triflex ProTect shines in situations where traditional materials in combination fail. Whether on top of or underneath other coverings: the roof waterproofing system provides reliable, lasting protection for roofs. The full-surface-reinforced waterproofing system with a polymethyl methacrylate (PMMA) base is highly weather-resistant and also resistant to UV and IR radiation. With its high resistance to hydrolysis, Triflex ProTect is also suitable for standing water applications, e.g. fountains and water tanks.

Triflex ProDetail

Triflex ProDetail is a waterproofing system developed specially for joints that ensures the lasting reliable protection of details. Generally speaking, leaks in a flat roof are only noticed when the premises underneath show signs of dampness. For this reason, damage tends to occur in the cold seasons. Triflex ProDetail is factory-set so that it can be used at substrate temperatures of -5°C. The liquid Triflex ProDetail is rainproof after approx. 30 minutes and completely cured in approx. 45 minutes. Repairs can therefore be reliably carried out in all weathers.

Belzona 1111

A 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. This repair material will not corrode and resists a wide range of chemicals. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.

Garnet (Natural Mineral Abrasive)

Microblast® is a natural mineral abrasive, reddish/pink in colour, predominantly almandite consisting of sub-angular particles mined from an alluvial resource.

Platinum Grit Blasting Abrasive

Blastrite® is a specially selected and graded Platinum slag with sharp angular particles, black in colour and particularly resistant to fracturing on impact.