You are here:

SUCTION MACHINE K-V8

SUCTION MACHINE K – V8

  • Recovery Rate: 3-4 tons/hr
  • Power Supply: 75kW or 90kW
  • Air Flow: 450mmHg

The way of general abrasive reclaiming not only consumes power but time as well. However, vacuum cleaner is the most economic, efficient and fast way to clean. K-V8 vacuum cleaner has been developed, which is applicable to blasting, characterized by small structure, easy operation, easy maintenance, high efficient and so like, completing the task well and fully.

K-V8 vacuum cleaner is able to be used for 24hours and can manually/automatically clean sand storage hopper in several minutes which can setup turning valve (choose whether to mount this valve depending on actual situation) to control abrasive cleaning.

Actual reclaiming rate3-4ton/hour
Max deliver distanceVertical 30m, transverse 20m
Electrical source3 phases, 415V/ 50 Hz (over voltage can be used too)

 

El-motor120 HP, insulation grade F, protection grade IP54
Airflow45 m3/min@, 0.06MPa (450mmHg)
Dust filteringHigh efficient cartridge filter
Filter area/material64m /4 polyurethane cartridges
Filter Cleaning systemWith outside compressed air reverse-blow dust, also, it can be setup in compressed air
Impulse jet-blow timingAdjustable electron timer
The rotary speed of vacuum pump1100rpm
Noise level85dBA (test away the machine with one meter)
Electric consumption(approximation)non-load 50A, max.load 115, start current 180A
Single vacuum pump








    * Required

    Technical Specification
    Actual reclaiming rate3-4ton/hour
    Max deliver distanceVertical 30m, transverse 20m
    Electrical source3 phases, 415V/ 50 Hz (over voltage can be used too)

     

    El-motor120 HP, insulation grade F, protection grade IP54
    Airflow45 m3/min@, 0.06MPa (450mmHg)
    Dust filteringHigh efficient cartridge filter
    Filter area/material64m /4 polyurethane cartridges
    Filter Cleaning systemWith outside compressed air reverse-blow dust, also, it can be setup in compressed air
    Impulse jet-blow timingAdjustable electron timer
    The rotary speed of vacuum pump1100rpm
    Noise level85dBA (test away the machine with one meter)
    Electric consumption(approximation)non-load 50A, max.load 115, start current 180A
    Single vacuum pump
    Contact Us








      * Required

      Dehumidifier

           Dehumidifier AR18000SE

           Dehumidifier KL-LFZ12000

           Dehumidifier LT-CTD50E

           Dehumidifier DM-1500R

      Vacuum

           Abrasive Recovery VR-E8

           Abrasive Recovery VR-90

           Suction Machine K-V8

      Dust Collector

           Dust Collector LB-PC 16

           Dust Collector LB-PC 20

      Spraying Equipment

           Evolution G-30H

      Abrasive Blaster

           Blastrac EBE 500S

      Compressor

           Fusheng SA75

      Air Cooler

           AirBlast ABAC-200/ PN 800CFM

           DMD- 25 HTF

      Compressor Air Dryer

           Hitachi HDR-75AE

           Fusheng FR100AP

           DMD- 25 HTF

      Cobra Scaffolding

           Cobra Scaffolding

      CONTACT US

      Need more information

      Industrial equipment rental

      VIVABLAST supplies equipment rental services for machinery used in several different industrial applications

      Find more with us.

      Subscribe Today!

      Send message

      If you’re interested in Suction Machine K-V8, VIVATECHS offers a wide range of services and resource persons to assist you.

      Blog