Nox-Rust® 1200DC

Nox-Rust® 1200DC

  • Protection Time: 1-5 years stored indoors in a sealed system
  • Appearance: Clear to tinted odorless liquid
  • Metal Protection: continuous protection for ferrous metals, compatible with copper and galvanized steel
VCI liquid 1200 is a water solution. It is a silica-free, volatile corrosion inhibitor (VCI) solution designed to protect the interior metal surfaces of enclosed systems, such as boilers, tanks, turbines, heat exchangers, and steam or condensate pipelines. This is particularly useful during extended periods of equipment inactivity, during storage or lay-up, or during and after hydrostatic testing. The chemical formulation provides continuous long and short-term corrosion protection for ferrous metals and compatible with copper and galvanized steel. This specially-engineered VCI prevents corrosion on metal surfaces in both vapor and contact phases. The volatile component is attracted to the metal surface above the water line and forms a molecular barrier against oxidation, so even the most difficult to reach recesses are protected.

Tính năng sản phẩm

không áp dụng

Các ứng dụng

  • Protection Time: 1-5 years stored indoors in a sealed system
  • Appearance: Clear to tinted odorless liquid
  • Metal Protection: continuous protection for ferrous metals, compatible with copper and galvanized steel

VCI liquid 1200 is a water solution. It is a silica-free, volatile corrosion inhibitor (VCI) solution designed to protect the interior metal surfaces of enclosed systems, such as boilers, tanks, turbines, heat exchangers, and steam or condensate pipelines. This is particularly useful during extended periods of equipment inactivity, during storage or lay-up, or during and after hydrostatic testing. The chemical formulation provides continuous long and short-term corrosion protection for ferrous metals and compatible with copper and galvanized steel. This specially-engineered VCI prevents corrosion on metal surfaces in both vapor and contact phases. The volatile component is attracted to the metal surface above the water line and forms a molecular barrier against oxidation, so even the most difficult to reach recesses are protected.

 

OneSource Stock nr Nox-Rust 1200DC:

Pail: 10220

Drum: 10221

Nox-Rust-1200DC-VCI-Oil-Additive-VCILiquids

Phê duyệt

không áp dụng

Tài liệu

Nox-Rust-1200DC-VCI-Oil-Additive-VCILiquids
Hỏi đáp sản phẩm
onesource-logo-viva-techs
Trong ngành dầu khí và vận tải biển trên toàn cầu – cùng với các đối tác của mình, Onesource cung cấp các giải pháp tiết kiệm chi phí trong việc bảo quản bằng cách sử dụng chất chống cháy do chúng tôi sản xuất và đối tác của chúng tôi là các sản phẩm Bảo quản, bảo trì, xây dựng, vận chuyển Daubert Cromwell VCI, v.v. Onesource cũng cung cấp nhiều loại sản phẩm về bảo vệ chống ăn mòn, chất bôi trơn, bu lông, miếng đệm, v.v.

Những sảm phẩm tương tự

Bột Nox-Rust®VCI 1015

Bột Nox-Rust® VCI 1010SFG

Bột Nox-Rust® VCI 1000SFG

Bột Nox-Rust® VCI 1000SF

bọt VCI

Chip VCI

Vui lòng liên hệ với chúng tôi - VIVATECHS sẵn sàng cung cấp một loạt các dịch vụ và nguồn lực cho các cá nhân để hỗ trợ bạn.

Liên hệ ngay

Blog

VIVABLAST tham gia Hội thảo kỹ thuật Triflex Châu Á 2024

VIVABLAST had the privilege of attending the Triflex Asia Technical Seminar held in Bangkok, Thailand. This notable event gathered sales representatives and contractors from across the region, including Singapore, China, Hong Kong, Australia, Indonesia, Malaysia, Thailand, Vietnam, and India.   Over the course of three days, the seminar offered valuable insights through in-depth discussions on…

Đọc thêm

ZINGA® - Giải pháp bảo vệ hệ thống pin mặt trời tối ưu

Rust is the number one “enemy” of solar panel mounting structures, leading to rapid degradation and reducing system efficiency.   To address this issue, ZINGA® has been developed as the optimal protection solution. Unlike conventional anti-corrosion paints, ZINGA® operates based on an electrochemical mechanism, creating an active protective layer that self-heals when scratched. This ensures…

Đọc thêm

Điều Ẩm Trong Quá Trình Bắn Cát

Discover why dehumidification is critical for successful abrasive blasting!   Without dehumidification during the blasting and coating process, corrosion can occur on exposed surfaces before a protective coating is applied, leading to significant operational challenges. If a blasted surface remains exposed for too long, ‘flash rust’ can develop, making the surface unsuitable for coating within…

Đọc thêm