TRIFLEX PROTECT

Triflex ProDetail is used for details on flat roofs, balconies, terraces and covered walks as well as parking decks.

Consumption: Min. 3.00kg/m² on a smooth, even surface

Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.

The Triflex ProTect product is used in the Triflex ProTect system and is a high-quality and durable waterproofing product for flat and pitched roofs in new buildings and refurbishments. Triflex ProTect is also used in the Triflex JWS system.

Consumption: Min. 3.00 kg/m² on a smooth, even surface

Triflex Cryl Finish 205 is used as a finish on dressed and undressed Triflex PMMA systems to increase chemical and mechanical resistance.

Consumption: Approx. 0.50 to 0.70 kg/m² on a smooth, even surface depending on area of use.

Triflex Cryl SC 237 is used to create colored maintenance paths and to mark danger areas (e.g. edge of the roof) on flat roofs with a pre-existing waterproofing system. The coating is non-slip.

Consumption: Approx. 2.00 kg/m² on a smooth, even surface, depending on the area of use

Triflex ProFibre is used for structurally hard-to-reach details, where it is impossible to use a fleece-reinforced waterproofing system.

Consumption: Min. 3.00 kg/m² on a smooth, even surface

Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.

Consumption: Depending on the degree of soiling and the substrate (at least 0.20l/m²)

Triflex Liquid Thixo is used as a thickening agent in Triflex PMMA products to allow the coating of vertical surfaces. It is not suitable for EP or PUR products.

Consumption: Amount to be added up to 1% by weight.

Triflex UltraCleaner is used as a universal cleaning and degreasing agent for treating Triflex surfaces.

Consumption: Depending on the degree of soiling and the substrate