You are here:

TRIFLEX PRODRAIN

Triflex ProDrain: balcony ancillary system for damp substrates.
Triflex ProDrain was specially developed for use on damp substrates and saves time and money compared to conventional refurbishment solutions. With Triflex ProDrain, there is generally no need to remove existing coverings, thus reducing the amount of dust and rubble produced. And because there’s no demolition or slow-drying screed involved, there’s no noise, dust or the long wait residents would otherwise have to put up with.

The closure time with the quick-lay Triflex Uncoupling Membrane DC-Mat and the following Triflex BTS-P waterproofing system is 2 to 3 days, a fraction of the usual 5 to 6 weeks.

System set-up

1. Adhesive

Triflex ProDrain Fix

Triflex ProDrain Fix is used to bond the Triflex Uncoupling Membrane DC-Mat to the Triflex ProDrain system.

Consumption: Min. 3.00 kg/m²

Download Product Information

2. Uncoupling

Triflex Uncoupling Membrane DC-Mat

Triflex Uncoupling Membrane DC-Mat is used in the Triflex ProDrain system.

Download Product Information

3. Load distribution

Triflex Pox R 100

Triflex Pox R 100 is used as a primer and for the production of Scraper fillers, Thin-layer mortar coverings, Thick-layer mortar coverings, Repair mortar
Consumption: Disposable primer: min. 0.30 kg/m² on smooth, level surface (Load distribution in the Triflex ProDrain system: minimum 1.30 kg/m²)

Download Product Information

Quarzsand 0,2-0,6 mm

Details can be found in the planning documents.

4. Triflex BTS-P Waterproofing system

Triflex Cryl Finish 205

Triflex Cryl Finish 205 is used as a finish on dressed and undressed Triflex PMMA systems to increase chemical and mechanical resistance.

Consumption: Approx. 0.50 to 0.70 kg/m² on a smooth, even surface depending on area of use.

Download Product Information

Triflex Cryl Primer 222

Triflex Cryl Primer 222 is used as a primer on asphalt for Triflex systems with a PMMA resin base.

Consumption: Min. 0.40 kg/m² on a smooth, even surface

Download Product Information

Triflex Cryl Primer 276

Triflex Cryl Primer 276 is used as a primer on absorbent substrates, such as concrete or screed, for Triflex systems with a PMMA base.

Consumption: Min. 0.40 kg/m² on a smooth, even surface

Download Product Information

Triflex Glass Primer

Triflex Glass Primer is used as a primer on unpolished glass substrates under various Triflex systems.

Consumption: Approx. 0.05 l/m² (50 ml) on a smooth, even surface

Download Product Information

Triflex Metal Primer

Triflex Metal Primer is used as a primer on various metals and rusty substrates.

Consumption: Approx. 0.08 to 0.10 l/m²

Download Product Information

Triflex Pox R 100

Triflex Pox R 100 is used as a primer and for the production of Scraper fillers, Thin-layer mortar coverings, Thick-layer mortar coverings, Repair mortar
Consumption: Disposable primer: min. 0.30 kg/m² on smooth, level surface (Load distribution in the Triflex ProDrain system: minimum 1.30 kg/m²)

Download Product Information

Triflex ProDetail

Triflex ProDetail is used for details on flat roofs, balconies, terraces and covered walks as well as parking decks.

Consumption: Min. 3.00kg/m² on a smooth, even surface

Download Product Information

Triflex Special Fleece

Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.

Download Product Information

Triflex ProFloor

Triflex ProFloor is used as a high-quality and durable coating for heavy-duty surfaces in the Triflex BTS-P, Triflex BFS and Triflex TSS balcony systems.

Consumption: Min. 4.00kg/m² on a smooth, even surface

Download Product Information

Triflex Cryl Finish S1

Triflex Cryl Finish S1 is used as a finish on Triflex BTS-P (S1), Triflex BFS (S1) and Triflex TSS (S1) systems.

Consumption: Approx. 0.50 to 0.70 kg/m² on a smooth, even surface depending on area of use.

Download Product Information

Triflex Micro Chips

Triflex Micro Chips are used for applying “Chips Design” surface designs with Triflex systems. They are a decorative dressing material with an acrylate copolymer base.

Consumption: The volume is at least 0.05 kg/m², on a smooth, even surface, depending on how densely the chips are applied

Download Product Information

Triflex Colour Mix

Triflex Colour Mix is used for the surface treatment of Triflex systems.

Consumption: The volume is at least 0.05kg/m², on a smooth, even surface, depending on how densely the chips are applied

Download Product Information

Triflex ProTerra

Triflex ProTerra is a high-quality and durable surface waterproofing product for use on balconies, terraces and covered walks in both new buildings and refurbishments. Triflex ProTerra can be used with the Triflex BTS-P, Triflex BWS and Triflex Stone Design systems.

Consumption: Min. 3.00kg/m² on a smooth, even surface

Download Product Information

Quartz sand 0.7-1.2 mm

Details can be found in the planning documents.

Quarzsand 0,2-0,6 mm

Details can be found in the planning documents.

5. Other/ Optional system components

Triflex ProDetail

Triflex ProDetail is used for details on flat roofs, balconies, terraces and covered walks as well as parking decks.

Consumption: Min. 3.00kg/m² on a smooth, even surface

Download Product Information

Triflex Special Fleece

Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.

Download Product Information

Triflex Metal Primer

Triflex Metal Primer is used as a primer on various metals and rusty substrates.

Consumption: Approx. 0.08 to 0.10 l/m²

Download Product Information

Triflex Cleaner

Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.

Consumption: Depending on the degree of soiling and the substrate (at least 0.20l/m²)

Download Product Information

Triflex Cryl Paste

Triflex Cryl Paste is used to level out any unevenness in the substrate and any fleece overlaps or depressions in Triflex systems.

Consumption: Approx. 1.40 kg/m² per mm thickness on a smooth even surface.

Download Product Information

Triflex Balcony Edge Finishing Profile

Edge profile

Download Product Information

Instruction for uses

Exceptional quality. Exceptional conformity.

With Triflex systems you have complete peace of mind whatever the application. At Triflex, we regard continuous internal and external quality controls in production and extensive field tests prior to market launch as essential.

Trading Product

Protective Coatings

Industrial Repair & Protection

Pipeline and Jetty Pile/ Port Protection

Corrosion Protection Packaging

Waterproofing Materials

Steel Structure Fire Protection

Cleaner and Rust Remover

Machinery and Equipment

Subscribe Today!

Technical Information

Discover more technical information about our exclusive innovative products that preserve your industrial assets.

VIEW MORE TECHNICAL INFORMATION

Blogs

How Zinga work?

ZINGA the sacrificial rate reduces dramatically after the zinc layer has oxidised and the natural porosity has been filled with zinc salts.

Repair and Touch Up of Hot Dip Galvanizing

ZINGA is specifically designed to be an excellent option for the repair and touch up of hot dip galvanizing.

Non-Slip Steel Protective Coating – Vitreflon 790

Non-Slip Steel Protective Coating – Vitreflon 790

Contact Us