Triflex ProDetail is a waterproofing system developed specially for joints that ensures the lasting reliable protection of details.
Triflex Cryl Primer 222
Triflex Cryl Primer 222 is used as a primer on asphalt for Triflex systems with a PMMA resin base.
Consumption: Min. 0.40 kg/m² on a smooth, even surface
Triflex Cryl Primer 276
Triflex Cryl Primer 276 is used as a primer on absorbent substrates, such as concrete or screed, for Triflex systems with a PMMA base.
Consumption: Min. 0.40 kg/m² on a smooth, even surface
Triflex Glass Primer
Triflex Glass Primer is used as a primer on unpolished glass substrates under various Triflex systems.
Consumption: Approx. 0.05 l/m² (50 ml) on a smooth, even surface
Triflex Metal Primer
Triflex Metal Primer is used as a primer on various metals and rusty substrates.
Consumption: Approx. 0.08 to 0.10 l/m²
Triflex Pox R 100
Triflex Pox R 100 is used as a primer and for the production of Scraper fillers, Thin-layer mortar coverings, Thick-layer mortar coverings, Repair mortar
Consumption: Disposable primer: min. 0.30 kg/m² on smooth, level surface (Load distribution in the Triflex ProDrain system: minimum 1.30 kg/m²)
Triflex Primer 610
Triflex Primer 610 is a fast-drying primer for universal use in improving adhesion on problematic substrates. The primer can be applied with a brush or a roller or by spraying.
Consumption: Approx. 40 to 80 g/m² depending on area of use, on a smooth, even surface
Triflex ProDetail
Triflex ProDetail is used for details on flat roofs, balconies, terraces and covered walks as well as parking decks.
Consumption: Min. 3.00kg/m² on a smooth, even surface
Triflex Special Fleece
Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.
Triflex Cryl Finish 205
Triflex Cryl Finish 205 is used as a finish on dressed and undressed Triflex PMMA systems to increase chemical and mechanical resistance.
Consumption: Approx. 0.50 to 0.70 kg/m² on a smooth, even surface depending on area of use.
Triflex ProFibre
Triflex ProFibre is used for structurally hard-to-reach details, where it is impossible to use a fleece-reinforced waterproofing system.
Consumption: Min. 3.00 kg/m² on a smooth, even surface
Triflex Cleaner
Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.
Consumption: Depending on the degree of soiling and the substrate (at least 0.20l/m²)
Triflex Liquid Thixo
Triflex Liquid Thixo is used as a thickening agent in Triflex PMMA products to allow the coating of vertical surfaces. It is not suitable for EP or PUR products.
Consumption: Amount to be added up to 1% by weight.
Triflex UltraCleaner
Triflex UltraCleaner is used as a universal cleaning and degreasing agent for treating Triflex surfaces.
Consumption: Depending on the degree of soiling and the substrate
2. Mix partial quantity thoroughly with the respective amount of catalyst additive
3. Apply generous coating of Triflex ProDetail
4. Work the Triflex Special Fleece into the laid material, making sure that there are no air bubbles.
5. Cut into the fleece at the corners and apply another generous coat of Triflex ProDetail
6. Follow the same procedure to bond to the surface
7. The waterproofing is rainproof after just 30 minutes
8. Triflex… waterproof down to the smallest detail!
Triflex products give you complete peace of mind whatever the application. We regard continuous internal and external quality controls in production and extensive field tests prior to market launch as essential.
Discover more technical information about our exclusive innovative products that preserve your industrial assets.
We’re proud to announce that over 2,000 3S Lift Climb Auto Systems have been installed in North America and over 55,000 Climb Auto Systems have been installed worldwide.
3S Lift is proud to announce winning the majority share of SGRE’s global supply of Service Lifts for the year 2021.
3S Lift is proud to announce the installation of 500 Climb Auto Systems in wind farms all over the US, adding to the many CAS installations worldwide.
The VCI molecules align on the surface of the metal to a depth of 3 to 5 molecules. This layer of molecules passivates the charged surface and creates a barrier that prevents oxidation.
ZINGA the sacrificial rate reduces dramatically after the zinc layer has oxidised and the natural porosity has been filled with zinc salts.
ZINGA is specifically designed to be an excellent option for the repair and touch up of hot dip galvanizing.
Non-Slip Steel Protective Coating – Vitreflon 790
Belzona Celebrates One Year of Superior Surface Tolerant, Fast Curing Epoxy Composite Material
How to repair pitting corrosion using Belzona’s epoxy solutions.
A wastewater treatment facility opts to use Belzona to repair corrosion on a booster tank instead of a costly replacement.
Zinga is used in a wide variety of applications which can be basically
Vivablast sign, seal and deliver with Belzona 3111 application