New Record Of Climb Auto System Installations
Wind energy is now the cheapest form of new energy development in many places worldwide.
Read more
Climbing Assistance for Improved Health & Safety
Climbing Assistance for Improved Health & Safety
The Climb Assist provides a constant lifting force during tower ascent and descent, significantly reducing fatigue and strain.
Automatically Adapts to the Climber’s Speed
The 3S Lift Climb Assist features an advanced design that automatically adapts to the climber’s speed. Variable-frequency vector control assures precisely attuned assistance, whether climbing up or down the tower. No manual operation is required to start or stop the system, allowing the operator to always maintain a safe hold on the ladder.
Key Features
Equipped with advanced speed adapting technology, the Climb Assist provides steady assistive force, adapting dynamically to the climber’s speed.
Variable-frequency vector control enables excellent dynamic performance and comfortable assistant force.
The Climb Assist offers a constant lifting force of 30–50 kg (65–110 lbs) during ascent, which can be easily adjusted based on the operator’s weight.
The Climb Assist provides a steady lifting force of 30 kg (65 lbs) during descent. This reduces stress on the body, especially on the knees and ankles.
The Climb Assist is also available as a full-cycle model (CA-2E), which enables a quicker transition between operators. Once the first operator is done climbing, the second operator can clip onto the wire rope anywhere and begin ascent immediately, without having to wait for the return of the connection point.
 | The top sheave fits between the top two rungs, thus minimizing required installation space. |
 | The traction wire rope is made of steel, providing safe and reliable performance in addition to extraordinary durability. |
 | The lightweight control box is waterproof and vibration-proof. It features an industrial cable plug for convenient and quick connection. If desired, it can be used as a portable device to support multiple Climb Assist units. |
 | The motor provides a continuous lifting force of 30–50 kg. |
The drive and the control box are designed to require no annual maintenance, reducing the overall maintenance time of the Climb Assist to a minimum.
| Lifting force | Adjustable from 30–50 kg (60–110 lbs) |
| Wire rope diameter | 6 mm |
| Protection class | Motor: IP 55; control box: IP 66 |
| Power supply | Single / 3 phase, 220 V, 50 / 60 Hz. Optional: 3 phase, 400 V, 50 Hz |
| Lifting speed | Adapts to climber’s speed; max. 37 m/min (120 ft/min) |
| Operating temperature | -40°C – +60°C (-40°F – +140°F) |
| Weight | Control box: 3.3 kg (7.2 lbs); motor: 17 kg |
| Certification | CE, ETL, OSHA compliant |
- Specifications
Lifting force Adjustable from 30–50 kg (60–110 lbs) Wire rope diameter 6 mm Protection class Motor: IP 55; control box: IP 66 Power supply Single / 3 phase, 220 V, 50 / 60 Hz.
Optional: 3 phase, 400 V, 50 HzLifting speed Adapts to climber’s speed;
max. 37 m/min (120 ft/min)Operating temperature -40°C – +60°C (-40°F – +140°F) Weight Control box: 3.3 kg (7.2 lbs); motor: 17 kg Certification CE, ETL, OSHA compliant
Improving Health & Safety
The repetitive motion of climbing the turbine tower is not only time-consuming and strenuous. It is also responsible for countless soft tissue injuries. The resulting sick leave and reduced employee motivation can stress the efficiency of the project.
Our Climb Assist provides a constant lifting force during tower ascent and descent, significantly reducing fatigue and strain. This boosts health and safety while also augmenting employee satisfaction and retention.
Retrofit in 3 Hours or Less
The 3S Lift Climb Assist can be easily retrofitted to any turbine ladder in less than three hours. It is easy to install and maintain, providing a low-cost solution for climbing assistance.
Installations Worldwide
The Climb Assist is CE and UL certified and trusted by customers around the globe. Highly valued for its safety, reliability, and ease of use, the 3S Lift Climb Assist has been installed in turbines worldwide.
Blogs
3S Lift Eclipses 500 Units of Climb Auto Systems in the US
3S Lift is proud to announce the installation of 500 Climb Auto Systems in wind farms all over the US, adding to the many CAS installations worldwide.
How VCI work?
The VCI molecules align on the surface of the metal to a depth of 3 to 5 molecules. This layer of molecules passivates the charged surface and creates a barrier that prevents oxidation.
How Zinga work?
ZINGA the sacrificial rate reduces dramatically after the zinc layer has oxidised and the natural porosity has been filled with zinc salts.
Repair and Touch Up of Hot Dip Galvanizing
ZINGA is specifically designed to be an excellent option for the repair and touch up of hot dip galvanizing.
Non-Slip Steel Protective Coating – Vitreflon 790
Non-Slip Steel Protective Coating – Vitreflon 790
Belzona 1818 Leads the Way in Abrasion-Resistant Repair Technology in a Striking Blaze of Blue
Belzona Celebrates One Year of Superior Surface Tolerant, Fast Curing Epoxy Composite Material
How to repair pitting corrosion
How to repair pitting corrosion using Belzona’s epoxy solutions.
How To Repair Corrosion At Wastewater Treatment Facility?
A wastewater treatment facility opts to use Belzona to repair corrosion on a booster tank instead of a costly replacement.
Stand alone system without topcoats to replace hot-dip galvanising or hot metal spray
Zinga is used in a wide variety of applications which can be basically
Vivablast sign, seal and deliver with Belzona 3111 application
Vivablast sign, seal and deliver with Belzona 3111 application