New Record Of Climb Auto System Installations
Wind energy is now the cheapest form of new energy development in many places worldwide.
Read more
ABRASIVE VACUUM RECOVERY SYSTEM VR-90
- Recovery rate: Up to 10 tons/hr
- Power Supply: 90kW
- Air Flow: 450mmHg
- Silo Capacity: 8-ton capacity
- Silo Dimensions: 1800mm X 3200mm (H)
WORKING TYPE
Vacuum Suction
USAGE
Blast cleaning
APPLICATION
Blasting and Painting
PRODUCT DESCRIPTION
VR-90 Abrasive Vacuum Recovery System is used to recover steel shots, grits, garnet, and copper slag after blasting. It is widely used in Shipyard, Marine Offshore, Oil & Gas
The conventional method of recovering spent abrasives is both labor intensive and time-consuming, while the fastest and most cost-effective method of cleaning up spent abrasives is by vacuuming recovery.
WORKING PRINCIPLE
VR-90 Abrasive Vacuum Recovery system is designed to be suitable for blasting operations. The system is engineered for minimum installation, easy operation, simple maintenance, and increased productivity with superior overall performance.
This vacuum recovery system provides 24-hours cleaning operation and allows for silo to be fitted with a rotary-valve (optional) for continuous dumping operation. The silo is equipped with a full-tank sensor to shut off the vacuum machine when it is full, preventing overloading of abrasives into the dust-collector. At the same time, it can also be engineered to activate the warning light and alarm (optional).
FEATURES
- System automatically shuts-off to prevent damage to the vacuum producer when the suction hose is choked up with abrasives and when the electric motor’s current rises above a certain pre-determined value.
- Cyclone is equipped with a full-tank sensor to shut down the vacuum machine when it is full to prevent overloading of abrasives in the dust collector. Silo full-tank sensor available as an option.
- An emergency ‘STOP’ button, when depressed, will automatically cut off all electrical supplies.
APPLICATION
To recover Steel Shots, grits, and garnet after blasting and widely used in the industry of shipbuilding, ship repair, big tank internal blasting, etc.
| Model No. | VR 90 |
| Electric motor | 90 kW, IP 55, Class F |
| Process Air Volume | 60 m3 / min (3600 CMH) |
| Vacuum Pressure | -450 mmHg |
| Transmission | V-belt driven |
| Dust Filtration | Cyclone and cartridge dust collector |
| Filter Cleaning | Reverse jet pulsing (timer) |
| Filter Efficiency | 99.95% High efficiency filter cartridge |
| Filter Cartridge | Dia. 324mm x 1000mm length (4 nos) |
| Control Panel | Traditional relay control (1P55 enclosure) |
| Protection | Wrong phase, overload, vacuum relief valve |
| Noise Level | 85 db 5m radius scale A |
| Power Supply | 380-415VI50HzI 3phase |
| Power Requirement | 120A . Full load, 50A – No load |
| Air Requirement | 25 dm max 10 bar |
| Silo Capacity | 8-ton capacity |
| Silo Dimensions | 01800mm X 3200mm (H) |
| Silo Weight | 1.6 ton |
| Machine Dimensions | 2800 x 2200 z 2250mm (LxWxH) |
| Machine Weight | 3.5 ton |
| Recovery Rate | Up to 10 tons/hr |
Optional Accessories | |
| Machine to Silo | 5’ z 20m WOP suction hose |
| Silo to Suction / Manifold | 4” z 20m WGP suction hose |
| Manifold to Vacuum | 2” z 20m GL ducting hose |
- Technical Specification
Model No. VR 90 Electric motor 90 kW, IP 55, Class F Process Air Volume 60 m3 / min (3600 CMH) Vacuum Pressure -450 mmHg Transmission V-belt driven Dust Filtration Cyclone and cartridge dust collector Filter Cleaning Reverse jet pulsing (timer) Filter Efficiency 99.95% High efficiency filter cartridge Filter Cartridge Dia. 324mm x 1000mm length (4 nos) Control Panel Traditional relay control (1P55 enclosure) Protection Wrong phase, overload, vacuum relief valve Noise Level 85 db 5m radius scale A Power Supply 380-415VI50HzI 3phase Power Requirement 120A . Full load, 50A – No load Air Requirement 25 dm max 10 bar Silo Capacity 8-ton capacity Silo Dimensions 01800mm X 3200mm (H) Silo Weight 1.6 ton Machine Dimensions 2800 x 2200 z 2250mm (LxWxH) Machine Weight 3.5 ton Recovery Rate Up to 10 tons/hr Optional Accessories
Machine to Silo 5’ z 20m WOP suction hose Silo to Suction / Manifold 4” z 20m WGP suction hose Manifold to Vacuum 2” z 20m GL ducting hose - Contact Us
CONTACT US
Need more information
Industrial equipment rental
VIVABLAST supplies equipment rental services for machinery used in several different industrial applications
Lastest News
3S Lift Eclipses 500 Units of Climb Auto Systems in the US
3S Lift is proud to announce the installation of 500 Climb Auto Systems in wind farms all over the US, adding to the many CAS installations worldwide.
How VCI work?
The VCI molecules align on the surface of the metal to a depth of 3 to 5 molecules. This layer of molecules passivates the charged surface and creates a barrier that prevents oxidation.
How Zinga work?
ZINGA the sacrificial rate reduces dramatically after the zinc layer has oxidised and the natural porosity has been filled with zinc salts.
Repair and Touch Up of Hot Dip Galvanizing
ZINGA is specifically designed to be an excellent option for the repair and touch up of hot dip galvanizing.
Non-Slip Steel Protective Coating – Vitreflon 790
Non-Slip Steel Protective Coating – Vitreflon 790
Belzona 1818 Leads the Way in Abrasion-Resistant Repair Technology in a Striking Blaze of Blue
Belzona Celebrates One Year of Superior Surface Tolerant, Fast Curing Epoxy Composite Material
How to repair pitting corrosion
How to repair pitting corrosion using Belzona’s epoxy solutions.
How To Repair Corrosion At Wastewater Treatment Facility?
A wastewater treatment facility opts to use Belzona to repair corrosion on a booster tank instead of a costly replacement.
Stand alone system without topcoats to replace hot-dip galvanising or hot metal spray
Zinga is used in a wide variety of applications which can be basically
Vivablast sign, seal and deliver with Belzona 3111 application
Vivablast sign, seal and deliver with Belzona 3111 application