Autres couches de finition

Autres couches de finition

The compatible epoxy, polyurethane and acrylic topcoats for many surfaces.Zingametall offers a wide range of compatible epoxy, polyurethane and acrylic topcoats. These topcoats differ in use (outdoor / indoor), gloss (satin / egg shell / high gloss) and characteristics (abrasion resistance / chemical resistance / …). The topcoats are commercialised for ZINGA projects only for larger quantities. Complete ZINGA systems are tested according to ISO 12944.

caractéristiques du produit

N / A

Applications

N / A

Approbations

N / A
ZINGA est un revêtement riche en zinc à un composant ou un système de galvanisation de film contenant du zinc 96% (poussière) dans son film sec. Il s'agit d'un revêtement métallique et non d'une peinture. La pureté du zinc utilisé est si élevée que le ZINGA sec ne contient aucun élément toxique.

Produits connexes

N'hésitez pas à nous contacter – VIVATECHS est là pour vous fournir une large gamme de services et de personnes ressources pour vous soutenir.

Blog

VIVABLAST proudly participated in the Triflex Asia Technical Seminar 2024

VIVABLAST had the privilege of attending the Triflex Asia Technical Seminar held in Bangkok, Thailand. This notable event gathered sales representatives and contractors from across the region, including Singapore, China, Hong Kong, Australia, Indonesia, Malaysia, Thailand, Vietnam, and India.   Over the course of three days, the seminar offered valuable insights through in-depth discussions on…

En savoir plus

ZINGA® – The optimal solution for protecting solar panel systems

Rust is the number one “enemy” of solar panel mounting structures, leading to rapid degradation and reducing system efficiency.   To address this issue, ZINGA® has been developed as the optimal protection solution. Unlike conventional anti-corrosion paints, ZINGA® operates based on an electrochemical mechanism, creating an active protective layer that self-heals when scratched. This ensures…

En savoir plus

Dehumidification In Abrasive Blasting

Discover why dehumidification is critical for successful abrasive blasting!   Without dehumidification during the blasting and coating process, corrosion can occur on exposed surfaces before a protective coating is applied, leading to significant operational challenges. If a blasted surface remains exposed for too long, ‘flash rust’ can develop, making the surface unsuitable for coating within…

En savoir plus