Veste Série 200

Veste Série 200

A 2 mm thick Ultra Violet Resistant High Density Polyethylene sheet which has impact, abrasion, and chemical resistance sufient for a wide range of environmental conditions.The RAM Series 200 Jacket is fastened with 316 stainless steel marine grade bolts and nuts.

caractéristiques du produit

N / A

Applications

CARACTÉRISTIQUES

A 2 mm thick Ultra Violet Resistant High Density Polyethylene sheet which has impact, abrasion, and chemical resistance sufient for a wide range of environmental conditions.The RAM Series 200 Jacket is fastened with 316 stainless steel marine grade bolts and nuts.

Approbations

N / A

Documentation

N / A
AIWC est une société australienne qui fournit des systèmes de protection et de prévention de la corrosion pour les pipelines et les pieux marins en Australie et dans toute la région Asie-Pacifique.​

Produits connexes

N'hésitez pas à nous contacter – VIVATECHS est là pour vous fournir une large gamme de services et de personnes ressources pour vous soutenir.

Blog

VIVABLAST proudly participated in the Triflex Asia Technical Seminar 2024

VIVABLAST had the privilege of attending the Triflex Asia Technical Seminar held in Bangkok, Thailand. This notable event gathered sales representatives and contractors from across the region, including Singapore, China, Hong Kong, Australia, Indonesia, Malaysia, Thailand, Vietnam, and India.   Over the course of three days, the seminar offered valuable insights through in-depth discussions on…

En savoir plus

ZINGA® – The optimal solution for protecting solar panel systems

Rust is the number one “enemy” of solar panel mounting structures, leading to rapid degradation and reducing system efficiency.   To address this issue, ZINGA® has been developed as the optimal protection solution. Unlike conventional anti-corrosion paints, ZINGA® operates based on an electrochemical mechanism, creating an active protective layer that self-heals when scratched. This ensures…

En savoir plus

Dehumidification In Abrasive Blasting

Discover why dehumidification is critical for successful abrasive blasting!   Without dehumidification during the blasting and coating process, corrosion can occur on exposed surfaces before a protective coating is applied, leading to significant operational challenges. If a blasted surface remains exposed for too long, ‘flash rust’ can develop, making the surface unsuitable for coating within…

En savoir plus