Vous êtes ici :

THERMOSTAT DEHUMIDIFIER 10000 CMH

LT- CTD50E

  • Process Airflow: 10000 m3/heure
  • Air Pressure: 270 Pa
  • Heating Power: 69.kW
  • Power Consumption: 80.2 kW

TYPE DE CONTRÔLE

Contrôle par automate

 

USAGE

Control Temp & Relative Humidity

 

APPLICATION

Blasting and Painting for shipyard, marine offshore, oil & gas tank, ventilation, paint curing,…

DESCRIPTION DU PRODUIT

Air-cooled temperature-regulating dehumidifier, steam compression refrigeration cycle, air as a cold (hot) source. It is widely used in aerospace field, civil air defense engineering, purification engineering, subway station, and chemical industry and other places with dehumidification requirements.

CARACTÉRISTIQUES

  • This machine can dehumidify, heating and cooling
  • Temperature control and accurate rate: 18-30℃ ±1.0℃
  • Energy saving
  • Auto defrost

PRINCIPES DE TRAVAIL

Temperature regulating dehumidifier: According to the humidity value set by the user, according to the principle of refrigeration and dehumidification, the relative humidity of the air can be adjusted, and the unit is equipped with outdoor air-cooled condenser. Taking away all the heat through the condenser can prevent the room temperature increase caused by the long-term operation of the dehumidifier.

Modèle LT-CTD50E
Dehumidifier Capacity 49.2L/H
Refrigerant capacity 78kW
Heating Capacity 69.8kW
Rated Power 27.5kW
Source de courant 380V/50Hz/3Ph
Cooling capacity 80.2 KW
Air circulation 13000 (m3/h)
Réfrigérant R407C
ESP 270Pa
Indoor Unit N.W 840KGS
Type of unit Temperature regulating and dehumidifying
Outdoor ambient temperature 18~43 °C
Indoor temperature humidity 18~32°C, 40~90%
Voltage Deviation (V) 5% ± rated voltage








    * Requis

    Spécifications techniques
    Modèle LT-CTD50E
    Dehumidifier Capacity 49.2L/H
    Refrigerant capacity 78kW
    Heating Capacity 69.8kW
    Rated Power 27.5kW
    Source de courant 380V/50Hz/3Ph
    Cooling capacity 80.2 KW
    Air circulation 13000 (m3/h)
    Réfrigérant R407C
    ESP 270Pa
    Indoor Unit N.W 840KGS
    Type of unit Temperature regulating and dehumidifying
    Outdoor ambient temperature 18~43 °C
    Indoor temperature humidity 18~32°C, 40~90%
    Voltage Deviation (V) 5% ± rated voltage
    Contact








      * Requis

      CONTACTEZ-NOUS

      Besoin de plus d'informations

      Location d'équipements industriels

      VIVABLAST fournit des services de location d'équipements pour les machines utilisées dans plusieurs applications industrielles différentes

      Trouvez plus avec nous.

      Abonnez-vous aujourd'hui !

      Envoyer le message

      Si vous êtes intéressé par Déshumidificateur thermostatique 10000 CMH, VIVATECHS vous propose une large gamme de services et de personnes ressources pour vous accompagner.

      Blog

      VIVABLAST proudly participated in the Triflex Asia Technical Seminar 2024

      VIVABLAST had the privilege of attending the Triflex Asia Technical Seminar held in Bangkok, Thailand. This notable event gathered sales representatives and contractors from across the region, including Singapore, China, Hong Kong, Australia, Indonesia, Malaysia, Thailand, Vietnam, and India.   Over the course of three days, the seminar offered valuable insights through in-depth discussions on…

      En savoir plus

      ZINGA® – The optimal solution for protecting solar panel systems

      Rust is the number one “enemy” of solar panel mounting structures, leading to rapid degradation and reducing system efficiency.   To address this issue, ZINGA® has been developed as the optimal protection solution. Unlike conventional anti-corrosion paints, ZINGA® operates based on an electrochemical mechanism, creating an active protective layer that self-heals when scratched. This ensures…

      En savoir plus

      Dehumidification In Abrasive Blasting

      Discover why dehumidification is critical for successful abrasive blasting!   Without dehumidification during the blasting and coating process, corrosion can occur on exposed surfaces before a protective coating is applied, leading to significant operational challenges. If a blasted surface remains exposed for too long, ‘flash rust’ can develop, making the surface unsuitable for coating within…

      En savoir plus