ELECTRIC - COMPRESSOR FUSHENG SA75

FUSHENG SA 75

  • Discharge Air Temparature: ≤40°C (Water Cooler) [≤Ambient temparature + 10°C (Air Cooler)]
  • Lubricant: 70L
  • Power Motor: 100HP (75 kW-380V – 50Hz
  • Speed Motor: 1480 rpm

An air compressor with a rotating piston mechanism is called a screw compressor utilized frequently to replace piston compressors that need high-pressure air, as well as for heavy-duty industrial applications and equipment that uses a lot of air power.

 

CONTROL TYPE

PLC Control

 

USAGE

Change the volume of air to create air pressure

 

APPLICATION

  • Either air cooling or water cooling is available for the FUSHENG SA 75 screw compressor can run constantly, automatically, and at high intensity for an extended period of time.
  • Suitable for a variety of industries, including those in the woodworking, electronics, automotive, textile, and beverage industries. A central compressed air system that has a reasonably high capacity, ranging from 15 kW to 200 kW, must be built in certain locations. Stopping the machine has an impact on orders and output due to the need for a steady air compressor with little noise, electricity savings, and damage.

 

ADVANTAGES

  • Effective filtration with a large capacity for separating dirt
  • Low current resistance
  • Good ventilation
  • Special paper composition makes the folds sturdy and stable
  • Long-lasting water resistance, engine protection, and high fire retardant efficiency

 

WORKING PRINCIPLE

  • Air is drawn in through the air filter when the screw air pump is running to remove dirt and pollutants.
  • Following that, the gas is injected into the compression chamber along with oil that serves to seal, lubricate, and cool the screw gap.
  • The oil filter removes pollutants and debris before the oil enters the compression chamber, providing the highest quality.
  • Screw compressors work on the articulation principle; throughout the matching process, the chamber volume varies.
Model SA 75
Discharge Air Temp ≤40°C (Water Cooler)

≤Ambient temparature + 10°C (Air Cooler)

Lubricant 70L
Power motor 75 kW
Speed motor 1480 rpm
Voltage 380V
Frequency 50Hz
Length 2200mm
Width 1230mm
Height 1668mm
Weight 2020kg








    * Required

    Technical Specification
    Model SA 75
    Discharge Air Temp ≤40°C (Water Cooler)

    ≤Ambient temparature + 10°C (Air Cooler)

    Lubricant 70L
    Power motor 75 kW
    Speed motor 1480 rpm
    Voltage 380V
    Frequency 50Hz
    Length 2200mm
    Width 1230mm
    Height 1668mm
    Weight 2020kg
    Contact Us








      * Required

      Dehumidifier

           Dehumidifier AR18000SE

           Dehumidifier KL-LFZ12000

           Dehumidifier LT-CTD50E

           Dehumidifier DM-1500R

      Vacuum

           Abrasive Recovery VR-E8

           Abrasive Recovery VR-90

           Suction Machine K-V8

      Dust Collector

           Dust Collector LB-PC 16

           Dust Collector LB-PC 20

      Spraying Equipment

           Evolution G-30H

      Abrasive Blaster

           Blastrac EBE 500S

      Compressor

           Fusheng SA75

      Air Cooler

           AirBlast ABAC-200/ PN 800CFM

           DMD- 25 HTF

      Compressor Air Dryer

           Hitachi HDR-75AE

           Fusheng FR100AP

           DMD- 25 HTF

      Cobra Scaffolding

           Cobra Scaffolding

      CONTACT US

      Need more information

      Industrial equipment rental

      VIVABLAST supplies equipment rental services for machinery used in several different industrial applications

      Find more with us.

      Subscribe Today!

      Send message