You are here:

Fast Charging | Longer working life

The Mode Smart Spider is the latest in automated ascending technology; allowing users to easily reach the tip or top of a wind turbine blade through the fast and stable Smart Spider Power Ascender.

Power Lock Mode

  • Energy management system developed by MODE
  • Power charge and discharge protection
  • Active protection function against high and low temperature
  • Undervoltage, overcurrent, overdischarge and short circuit protection

Features

  • Digital Motor and Rope Access Wheel that supports a diameter of 9.5mm~13mm, allowing for a high, stable torque without the hassle of a lengthy setup period.
  • Remote control access through the usage of the MODE controller app for easy ascent and descent at the touch of a button.
  • Rotating Handle to control the speed of ascent and descent.
  • Manual Release Button allows for controlled descent without requiring power. Battery management system with LED display.
  • Long-life, fast-charging batteries.

POWER GENERATION SYSTEM

  • Permanent magnet motor with multi-stage planetary gear drive mechanism.
  • Powerful motor with constant torque, low heat, precise speed control.
  • The multi-stage planetary gear provides a large speed ratio and high traction in a small volume.
Appearance Material Durable Aviation Aluminum
Maximum Load Supported 200 Kg
Power 1000W
Distance (Per Battery Charge) 330m Ascent With 120kg Of Weight
Operating Temperature -20C / +50C
Recommended Rope Standard En1891, Semi-Static Rope, Diameter 10.5 Mm To 11 Mm, Ductility Not Exceeding 4%.
Appearance In Size 330*265*267(MM)
Voltage 36V
Battery 5000mah (Hot Swappable)
Degree Of Protection IP54
Wifi Maximum Distance 100m
Emergency Descent With Power Disconnected Have
Weight 14.3kg (Includes Battery)
Battery (Charging Time) 2.5 Hours
Emergency Stop Yeah
Standard Security Buckle Safety Buckle (D)
Charger Single Charger
Variable Speed Control
  • Ascent: 0~20m /Minute
  • Descent: 0~37m /Minute








    * Required

    Technical Specification
    Appearance Material Durable Aviation Aluminum
    Maximum Load Supported 200 Kg
    Power 1000W
    Distance (Per Battery Charge) 330m Ascent With 120kg Of Weight
    Operating Temperature -20C / +50C
    Recommended Rope Standard En1891, Semi-Static Rope, Diameter 10.5 Mm To 11 Mm, Ductility Not Exceeding 4%.
    Appearance In Size 330*265*267(MM)
    Voltage 36V
    Battery 5000mah (Hot Swappable)
    Degree Of Protection IP54
    Wifi Maximum Distance 100m
    Emergency Descent With Power Disconnected Have
    Weight 14.3kg (Includes Battery)
    Battery (Charging Time) 2.5 Hours
    Emergency Stop Yeah
    Standard Security Buckle Safety Buckle (D)
    Charger Single Charger
    Variable Speed Control
    • Ascent: 0~20m /Minute
    • Descent: 0~37m /Minute
    Contact Us








      * Required

      If you’re interested in Mode Smart Spider Powered Ascender, VIVATECHS offers a wide range of services and resource persons to assist you.

      Blog

      VIVABLAST proudly participated in the Triflex Asia Technical Seminar 2024

      VIVABLAST had the privilege of attending the Triflex Asia Technical Seminar held in Bangkok, Thailand. This notable event gathered sales representatives and contractors from across the region, including Singapore, China, Hong Kong, Australia, Indonesia, Malaysia, Thailand, Vietnam, and India.   Over the course of three days, the seminar offered valuable insights through in-depth discussions on…

      Read more

      ZINGA® – The optimal solution for protecting solar panel systems

      Rust is the number one “enemy” of solar panel mounting structures, leading to rapid degradation and reducing system efficiency.   To address this issue, ZINGA® has been developed as the optimal protection solution. Unlike conventional anti-corrosion paints, ZINGA® operates based on an electrochemical mechanism, creating an active protective layer that self-heals when scratched. This ensures…

      Read more

      Dehumidification In Abrasive Blasting

      Discover why dehumidification is critical for successful abrasive blasting!   Without dehumidification during the blasting and coating process, corrosion can occur on exposed surfaces before a protective coating is applied, leading to significant operational challenges. If a blasted surface remains exposed for too long, ‘flash rust’ can develop, making the surface unsuitable for coating within…

      Read more