You are here:

Climbing Assistance for Improved Health & Safety

The 3S Lift Climb Assist provides a constant lifting force during tower ascent and descent, significantly reducing fatigue and strain.

3S-lift-Climb-Assist-vivablast-viva-techs
3S-lift-Climb-Assist-vivablast-viva-techs-2

Automatically Adapts to the Climber’s Speed

The 3S Lift Climb Assist features an advanced design that automatically adapts to the climber’s speed. Variable-frequency vector control assures precisely attuned assistance, whether climbing up or down the tower. No manual operation is required to start or stop the system, allowing the operator to always maintain a safe hold on the ladder.

Key Features

Equipped with advanced speed adapting technology, the Climb Assist provides steady assistive force, adapting dynamically to the climber’s speed.

Variable-frequency vector control enables excellent dynamic performance and comfortable assistant force.

The Climb Assist offers a constant lifting force of 30–50 kg (65–110 lbs) during ascent, which can be easily adjusted based on the operator’s weight.

The Climb Assist provides a steady lifting force of 30 kg (65 lbs) during descent. This reduces stress on the body, especially on the knees and ankles.

The Climb Assist is also available as a full-cycle model (CA-2E), which enables a quicker transition between operators. Once the first operator is done climbing, the second operator can clip onto the wire rope anywhere and begin ascent immediately, without having to wait for the return of the connection point.

The top sheave fits between the top two rungs, thus minimizing required installation space.
The traction wire rope is made of steel, providing safe and reliable performance in addition to extraordinary durability.
The lightweight control box is waterproof and vibration-proof. It features an industrial cable plug for convenient and quick connection. If desired, it can be used as a portable device to support multiple Climb Assist units.
The motor provides a continuous lifting force of 30–50 kg.

The drive and the control box are designed to require no annual maintenance, reducing the overall maintenance time of the Climb Assist to a minimum.

Lifting force Adjustable from 30–50 kg (60–110 lbs)
Wire rope diameter 6 mm
Protection class Motor: IP 55; control box: IP 66
Power supply Single / 3 phase, 220 V, 50 / 60 Hz.
Optional: 3 phase, 400 V, 50 Hz
Lifting speed Adapts to climber’s speed;
max. 37 m/min (120 ft/min)
Operating temperature -40°C – +60°C (-40°F – +140°F)
Weight Control box: 3.3 kg (7.2 lbs); motor: 17 kg
Certification CE, ETL, OSHA compliant
Specifications
Lifting force Adjustable from 30–50 kg (60–110 lbs)
Wire rope diameter 6 mm
Protection class Motor: IP 55; control box: IP 66
Power supply Single / 3 phase, 220 V, 50 / 60 Hz.
Optional: 3 phase, 400 V, 50 Hz
Lifting speed Adapts to climber’s speed;
max. 37 m/min (120 ft/min)
Operating temperature -40°C – +60°C (-40°F – +140°F)
Weight Control box: 3.3 kg (7.2 lbs); motor: 17 kg
Certification CE, ETL, OSHA compliant
3S-Lift-Authorized Distributor-Certificate-vivablast-climb-assist

Improving Health & Safety

The repetitive motion of climbing the turbine tower is not only time-consuming and strenuous. It is also responsible for countless soft tissue injuries. The resulting sick leave and reduced employee motivation can stress the efficiency of the project.

Our Climb Assist provides a constant lifting force during tower ascent and descent, significantly reducing fatigue and strain. This boosts health and safety while also augmenting employee satisfaction and retention.

Retrofit in 3 Hours or Less

The 3S Lift Climb Assist can be easily retrofitted to any turbine ladder in less than three hours. It is easy to install and maintain, providing a low-cost solution for climbing assistance.

Installations Worldwide

The Climb Assist is CE and UL certified and trusted by customers around the globe. Highly valued for its safety, reliability, and ease of use, the 3S Lift Climb Assist has been installed in turbines worldwide.

If you’re interested in Climb Assist, VIVATECHS offers a wide range of services and resource persons to assist you.

Blog

VIVABLAST proudly participated in the Triflex Asia Technical Seminar 2024

VIVABLAST had the privilege of attending the Triflex Asia Technical Seminar held in Bangkok, Thailand. This notable event gathered sales representatives and contractors from across the region, including Singapore, China, Hong Kong, Australia, Indonesia, Malaysia, Thailand, Vietnam, and India.   Over the course of three days, the seminar offered valuable insights through in-depth discussions on…

Read more

ZINGA® – The optimal solution for protecting solar panel systems

Rust is the number one “enemy” of solar panel mounting structures, leading to rapid degradation and reducing system efficiency.   To address this issue, ZINGA® has been developed as the optimal protection solution. Unlike conventional anti-corrosion paints, ZINGA® operates based on an electrochemical mechanism, creating an active protective layer that self-heals when scratched. This ensures…

Read more

Dehumidification In Abrasive Blasting

Discover why dehumidification is critical for successful abrasive blasting!   Without dehumidification during the blasting and coating process, corrosion can occur on exposed surfaces before a protective coating is applied, leading to significant operational challenges. If a blasted surface remains exposed for too long, ‘flash rust’ can develop, making the surface unsuitable for coating within…

Read more